Graph-tech Ghost Bedienungsanleitung PDF herunterladen (Seite 47)

Plug the Interface Wiring Harness (ribbon cable)

into the header pins on 13-pin jack; this connection

is ‘keyed’ (one pin missing, one hole blocked) so

that it can only be plugged in correctly. Feed the

harness through the mounting hole and into the

control cavity where the Hexpander will be located.

Connecting Hexpander to 13-pin jack

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 75 76

Keine Kommentare

Graph-tech Ghost Bedienungsanleitung Seite 47