Graph-tech Nut Bedienungsanleitung PDF herunterladen

LOW E = .010” GAP

HIGH E = .006” GAP

STEP 1. Remove the strings. Trace around

(score) every edge of the nut with an

exacto knife to prevent lacquer sticking

to the nut and the neck and chipping

away.

STEP 2. If the nut is not sitting in a slot,

usually a light tap with a small block will

set it free. If it is sitting in a slot, gently

tap it out sideways using a hammer and

a screw driver.

STEP 3. When it is sticking out the side,

pull it out in the same direction with a

pair pliers, like you would a tooth.

Scrape or file the nut slot free from old

glue and finish residue while making

sure that slot remains square.

STEP 4. See if the Graph Tech nut fits into

the slot, without forcing it. If it’s too thick,

place a 400 to 600 grit sand paper face

up on a flat surface and sand down the

sides of the nut until it fits in the slot

snugly but is easily removable.

STEP 5. Restring the high and low E

strings and tune to pitch to check for

correct height. Pushing down on the

third note of the low E string should

result in a .010” gap between the string

and the first fret; high E string should be

.006”

STEP 6. Once you’ve done the thickness

and the height, you just need to sand the

ends of the nut so that they are flush

with the neck. Just use a pencil and mark

the ends of the nut that are sticking out,

remove it from the neck and sand it to

your marks.

NUT INSTALLATION INSTRUCTIONS

NEED HELP? Contact GRAPH TECH GUITAR LABS at 604-940-5353, via e-mail at

sales@graphtech.com, or consult our website at www.graphtech.com

Inhaltsverzeichnis

Seite 1 - HIGH E = .006” GAP

LOW E = .010” GAPHIGH E = .006” GAPSTEP 1. Remove the strings. Trace around (score) every edge of the nut with an exacto knife to prevent lacqu

Kommentare zu diesen Handbüchern

Keine Kommentare

Graph-tech Nut Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Graph-tech Nut herunter. Graph Tech Nut User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Graph-tech Nut